Broward County Commercial Kitchen & Grease Interceptor Permit Calculator
Official fee schedule logic based on Broward County Administrative Code Chapter 9. Includes plan review fees, technology surcharges, and prerequisite contractor bond rules.
- AHJ Authority
- Broward County Building Code Division
- Enforced Ordinance
- Broward County Administrative Code Chapter 9
- Plan Check SLA
- 14 - 22 Business Days
- Surety Bond Required
- $10,000
Broward County Commercial Permit Fee Estimator
Tier Valuation Formula: $1,665 base fee + $3.80 per $1,000 above $250,000 valuation.
Mandatory Contractor Prerequisites & Submittal Checklist
Broward County AHJ RequirementsContractor Surety License Bond
Broward County requires an active $10,000 Florida Licensed Contractor Bond on file prior to plan submittal.
Commercial COI Liability ($1M+)
Minimum $1.0M General Liability COI naming Broward County Building Dept as Certificate Holder.
Commercial Kitchen & Grease Interceptor Submittal Rules in Broward County
Specialized trade submittals for Commercial Kitchen & Grease Interceptor in Broward County, Florida are administered by Broward County Building Code Division. Permits are required prior to installing, extending, replacing, or altering any mechanical, electrical, plumbing, structural, or life-safety infrastructure under Broward County Administrative Code Chapter 9.
Intake review for Commercial Kitchen & Grease Interceptor requires verified trade licensing, minimum contractor general liability COI filings ($1,000,000+), and compliance with enforced regional code editions (HVHZ Hurricane Wind-Load & Flood Elevation Certifications.).
Mandatory Submittal Plan Documents & PE Engineering Stamps
Plans submitted to Broward County Building Code Division for Commercial Kitchen & Grease Interceptor must include scaled engineering drawings and specifications:
- Food Service Grease Interceptor Calculations
- County Health Dept Clearance
Inspection Sequence for Commercial Kitchen & Grease Interceptor
Work performed under a Commercial Kitchen & Grease Interceptor permit in Broward County requires mandatory rough-in and final field inspections. Rough-in inspections must be conducted and signed off by the municipal inspector prior to covering or concealing any piping, ductwork, structural framing, or electrical conductors. Final inspection and system testing are required for building certificate of completion issuance.
Broward County Building Code Division Official Building Department
1 N University Dr, Plantation, FL 33324 | Phone: (954) 765-4400